Model 1000c Computerized Transmissometer with remote head.

Model 1000C
Computerized Transmissometers

HOME

Model 100
Transmissometer

Model 100V
Transmissometer

Model 100IR
Transmissometer

Model 500W
Transmissometer

Reflectometers

Fizeau
Interferometers

Infrared
Interferometers

Dual Wavelength
Interferometers

Tutorials

About Us

Basic Price for single channel $6,495.00 FOB Chatsworth, California

Model 1000C
This is a computerized Model that may be configured in all of the same formats as the Model 500W. It permits the collection of both numeric and graphic data. Because it offers continuous output, the Model 1000C is capable of being used for process control as well as storage of data for quality assurance. Available in single or multiple channels. The Model 1000C is sold complete with computer and data acquisition hardware and software. If you tell us what you are measuring and what type of data you wish to recover, we can configure a system specially for your needs and will provide you with a quotation without obligation.

Configured as a bench top instrument as shown at the right, or as a rack mount, as shown below, the Model 1000C transmissometer provides a direct readout of Transmittance so it may be used with or without its computer. The 2-channel versions shown below can be configured for measurement of transmittance at two separate positions, in two different directions for materials that are not isotropic, or at two different wavelengths.

Multiple channels can be provided, all with separate readouts if desired, and all connected to the computer for data storage and analysis.

Rack mounted systems are ideal for multiple channel configurations.

Each channel has a separate readout as well as its own set of controls and each is monitored independently by the computer.

Below is a Model 100V dual Channel Transmissometer -- this one operating at both visible and infrared wavelengths. In this model, for economy, the two channels share a readout. However, each channel has its own analog output which can be connected to a data logger or chart recorder. This model could be retrofitted to perform as a Model 1000C with the full benefit that the computer provides.

GENERAL SPECIFICATIONS OF MODEL 1000C TRANSMISSOMETERS

FEATURES	BENEFITS
Wide selection of wavelengths available	White light Selection of visible wavelengths using filters Selection of IR wavelengths available
Test beam 10.0 mm diameter	Averages transmittance over larger area
4-1/2 digit LED or LCD Readout (+/- 0.02% accuracy)	Large LED readouts may be read at a distance
Multiple channels available	Visible, IR, or assortment of visible and IR
Remote Optical Head	Usable for measuring moving web Model for use in high vacuum chamber Submersible remote heads available
Bench Top or Rack Mount	Customer's choice of desktop model or rack mount
Analog output for each channel	Permits data logging or chart recording of each channel
Power requirements: 117 volts 60 Hz or 220 volts 50 Hz	Wired to connect to customer's requirement
Standard limited warranty on parts and labor	1 year

For Further Information, Prices, Delivery, call Gordon Graham today at
(818) 700-1263 or send an email to the address below.

GRAHAM OPTICAL SYSTEMS, 9530 Topanga Canyon Blvd., Chatsworth, CA 91311

Phone (818) 700-1263 FAX (818) 700-1627 E-mail: techinfo@grahamoptical.com

This page last updated July 7, 2008